This is a a high specification, floor standing, heavy duty metal turning lathe suitable for the keen model engineer, general maintenance and small production workshops. Featuring a precision ground induction hardened bed, fully gear driven spindle with hardened and ground gears giving a speed range of 65 - 1,810 rpm, selectable via the front of headstock mounted gear selection levers. The fitted 1,500W single phase motor delivers more than enough power for any turning project.
The D1-4 camlock spindle is supported by adjustable taper roller spindle bearings and a range of cross and longitudinal feed speeds are selected on a separate gearbox.
Supplied with a large range of standard accessories including a 150mm(6") 3 jaw self centring chuck, 200mm(8") 4 jaw independent chuck, thread indicator, spindle foot brake with power off, chuck guard with safety interlock, splash guard, coolant pump system, work lamp, face plate, dead centres.,5 to 3 MT reduction sleeve, steady rest, follow rest,. floor stand with oil tray and foot stands, change gears and toolbox with maintenance tools.
The overall capacities are 900mm between centres and 300mm swing over the bed. A removable gap in the bed delivers 450mm swing. Thread cutting capabilities in metric are within the range of 0.4 to 7mm, the thread indicator giving easy re-engagement of the leadscrew in the correct position. Also supplied are change gears for imperial thread pitches within the range of 4 to 60 TPI (note the thread indicator is set for metric only). This machine is supplied with everything you will ever need except tooling. The electrical connection plug is 10A thus the CQ6230A will run off any domestic/home power supply. This metal lathe is incredible value, produced with precision slides and ways, the CQ6230A will keep up with the most demanding machining job!
- Geared drive headstock for quick change of spindle speeds
- Low voltage work light
- Inching button in the front panel
- Chuck and change gear guards fitted with cut out switches
- Foot operated spindle brake with power off switch
- Coolant system
- Powered longitudinal and cross feeds
- Change gears for metric and imperial thread cutting
Metal Lathe CQ-6230A - Specifications:
|Number of spindle speeds||18|
|Speed range||65 ~ 1810 RPM|
|Swing over bed||310mm|
|Swing over the saddle||180mm|
|Swing in gap||450mm|
|Distance between centres||910mm|
|Motive power||1.5 Kw [2 HP]|